Skip to content

Level 2 Certificate in Fabrication and Welding Techniques and Skills – Full Time

Location Chesterfield College
Start date 08 Sep 2025
Type Full-time Provision
Skip to:

If you enjoy, practical, hands on learning this is the course for you. You will learn all the basics for fabrication and welding.

You will have use of your fabrication workshop where you will use welding techniques to fuse metals together.

You will be learning from industry recognised tutors with experience and excellent fabrication and welding knowledge and understanding. Throughout the course there are various ways of getting your foot on to the ladder of a career out in industry, be that through work experience, industry placement or an apprenticeship. Tutors and career specialist staff at college will help you prepare for that next step throughout the course.

Additional information: PPE is required in the form of Flame retardant overalls and steel toe capped boots. We link with PPE suppliers and can help to get you kitted out at the start of your course if you don’t have these – bursaries (help to cover the cost of these materials) are available.

Course Structure

During this course you will learn modules such as:

  • Health and Safety in a Fabrication and Welding Environment
  • Materials, Science and Calculations for Fabrication and Welding Practice
  • Metal-Arc Gas Shielded Welding – Low Carbon Steel, Stainless Steel or Aluminium
  • Fabrication Processes – Plate (3mm and Above in Thickness)
  • Fabrication Processes – Sheet Metal (Below 3mm in Thickness)

This course requires the production of 2 welds in the flat position and these must be completed in either MAGS, MMA or TAGS welding processes. The completed welds will be visually and destructive tested to aid you in understanding of what is required to produce a good weld.

The fabrications for both courses cover a platework unit (3mm and above) and a sheet metal unit (3mm and below). You are issued with engineering drawings to work from and only the complexity of the fabrications increases with course level.

The practical work for this course is graded by pass, merit or distinction.

Entry Requirements

You will need GCSEs in English or Maths at grade 4. You must be willing to learn and develop yourself. You must have an interest in Engineering.

Assessment methods

Practical assessment, written tasks and end of year exam.

Fees and funding

Free for Eligible 16-18 year olds. Adult funding available dependant on learner circumstances otherwise course costs apply.

Progression

Successful completion of the Level 2 course and remaining GCSE will give you the opportunity to progress into either Level 3 Fabrication and welding or a Level 3 Sub Diploma in Engineering.

Attendance

Daytime

Incredible support

We can help you find the right course

Step towards your dream career. From vocational college courses, Sixth Form, Apprenticeships and University, we have a pathway to direct you into employment or further education.